Drones
Kronos I3 FTS system
Safety first when flying with DJI Inspire 3
Nowadays, drones have become an integral part of many industries, from film production to infrastructure inspections. However, with the increasing complexity and deployment of drones comes an increased need for safety, especially for higher-risk flights that go beyond the scope of “open” category operations. For such specific operations, compliance with strict regulatory requirements is essential, and one of the key elements is an independent flight termination system (FTS).
What is an FTS system and why is it so important?
The FTS system is your emergency brake in critical situations. Its primary function is to disconnect the UAV’s power supply in an emergency, preventing the drone from leaving a predefined flight area and minimizing potential risks to people and property on the ground. Think of it as an intelligent safety switch that ensures the drone does not leave the flight area even in the event of unexpected events.
Specification
Kronos I3: Reusable system for maximum reliability
The Kronos I3 FTS system is designed with reliability and reusability in mind. It consists of several key components:
- Remote control: Allows the pilot to manually activate the FTS when necessary.
- FTS connector between batteries: This ingenious component ensures immediate and safe disconnection of the drone’s power supply.
- Integrated parachute: A key element for reducing impact energy after FTS activation.
How does Kronos I3 work in practice?
In the event of unpredictable drone behavior, when there is no other way to resolve the situation, the FTS can be activated either manually by the operator or autonomously if the system detects non-standard UAV behavior.
Upon activation, the engines are immediately stopped and a parachute is deployed, which significantly slows down the drone’s fall.
A major advantage of the Kronos I3 system is its independence from drone control. This means that the FTS works reliably even in situations where there is signal interference or controller failure. This separate architecture is key to maximum safety.
Autonomous system: Faster and safer than humans
Kronos I3 takes safety to a new level with its autonomous parachute module. While it takes a human operator approximately 3 seconds to deploy a parachute, the autonomous system can do it in an incredible 0.27 seconds! The autonomous system is thus demonstrably faster than human intervention.
Compliance with the highest standards: EASA C5 / MOC M2 / MOC 2511
The Kronos I3 FTS system complies with the latest and most stringent European standards published by the EASA (European Union Aviation Safety Agency), specifically C5 / MOC M2 / MOC 2511. This confirms that Kronos I3 complies with the highest standards of safety and reliability for drone operations in a specific category.
Increase the safety of your DJI Inspire 3 with Kronos I3
If you operate your DJI Inspire 3 in demanding conditions and need to meet strict safety requirements for a specific category of operation, the Kronos I3 FTS system is the ideal choice. It offers cutting-edge technology, fast response times, and compliance with European standards, allowing you to fly with maximum confidence and safety.
System parameters
| Weight | 376 g |
| Maximum range | 1.5 km |
| Minimum operating height | 30 m |
| Autonomous system activation time | 0.27 s |
| Average impact energy | 24 J |
